Features + Functions

LED Indications:

PLUG IN + POWER UP


1. Fully tighten the BLE Antenna to the back of the Bridge, pivoting in the upright position.	2. Plug Ethernet cable into Bridge from your Internet Router.

3. Plug the Power Jack end into the Bridge and the power adapter into a power outlet.	4. Verify the green LED in ON, see the LED chart* if any other light blinks or remains solid.


• Launch the SmartEntry app on smartphone • Click the slider menu	• Select Setup Product option

• Select Bridge from the list	• Select your Bridge from the list

• Provide Name, Location, and Time Zone	• The Bridge will start the set up process


• The Bridge will search nearby device and connect	•List of connected devices and their status