Features + Functions

PACKAGE CONTENTS

+ Rocky Mountain Ethernet Bridge
+ Ethernet Cable (3 feet long)
+ BLE Antenna
+ Power Supply 5V@1A
+ Product Information Label

VERIFY PREREQUISITES

+ Install Rocky Mountain Lock app on smartphone
+ Register and add at least one Rocky Mountain Lock to your account

LED INDICATIONS



1. Fully tighten BLE Antenna to the back of the Bridge, pivoting in the upright position.	2. Plug Ethernet into bridge from your internet router.

3. Plug the power Jack end into the bridge and the power adapter into a power outlet.	4. Verify the green LED is ON, see the LED chart* if any other light blinks or remains solid.
	*LED chart is shown in the back of this sheet

Plug In + Power Up


Launch the RMHWireless App on smartphone Click the slider menu	Select Setup Product option

Select Bridge from the list	Select your Bridge from the list

Provide Name, Location, and Time Zone.	The Bridge will start the set up process

The Bridge will search nearby device and connect.	List of connected devices and their status