First Watch Safe can be used stand-alone and can be configured using keypad without using mobile app. There are multiple settings can be done using keypad other than lock/unlock/open/close. Here is the list of all keycode settings
| Action | Code | Notes |
|---|---|---|
| Set Master PIN(Code) |
*Current Master PIN*10*New 8 digit Master PIN(Code) # |
The default PIN is 123456 |
| Add User Code | *PIN(Master Code)*20*N*4 digits access code# | N= Any number from between 1-49 to form a sequence. Cannot add schedule when adding user code using keypad. |
| Delete User Code | *PIN (Master Code)*30*N# | N= User sequence number between 1-49. Use 0 to delete all users |
| Delete User using User Code | *PIN (Master Code)*31*4 digits access code# | If you don't remember the user sequence number then you can delete with actual user access code |
| Add USB Key | *PIN (Master Code)*40*N# (flash key number) and now insert USB key |
N=1 to 49 User number. USB key Users cannot have schedule when adding using keypad |
| Delete USB Key | *PIN (Master Code)*41*N# |
N=1 to 49 User number |
| Add Fob | *Master PIN(Code) *50*N*M# and now Press & hold key on fob |
N=1 to 49 (fob number), M =1 to unlock safe |
| Delete Fob | *PIN (Master Code)*51*n# |
N= 0 will delete all fobs N= 1 to 49 to delete particular fob |
| Configure date & time | *PIN (Master Code)*60*YYMMDD*HHmm# | Supported only in FirstWatch Safe with LCD |
| Reset Alarm | #User Code | For Ex. When vibration is detected and alarm goes off, you can reset alarm using this code or mobile user or usb key |
| Sound on key press on/off | *PIN (Master Code)*70*n# |
N = 0(off) N = 1(on) - Default is on |
| Keypad | *PIN (Master Code)*72*n# | N = 0(disabled), 1(enabled) - default is enabled. When keypad is disabled, you can only enable it. Keypad will ignore everything else |
| Vibration sensor on/off | *PIN (Master Code)*73*n# | N = 0(off), 1(on) - default is OFF. |
| Vacation mode | *PIN (Master Code)*71*n# |
N = 0(disabled) N = 1(enabled) - Default disabled. When this mode is enabled, all local & remote operations are disabled using mobile app |
| Spy Protection | *PIN (Master Code)*77*n# |
N = 0(disabled) N = 1(enabled) - Default disabled |
| Unlock Safe | #4 digits Code |
Comments
0 comments
Please sign in to leave a comment.