What do the LED indications and buzzer sound mean on Safe?

First Watch Guardian Safe has LED(light) indications and buzzer indication to notify different situation. You may refer this table for more detail

Operation	Red LED	Green LED	Blue LED	Orange LED	Beep/Buzz	Comment
Press keypad button (0-9)	-	0.1 seconds	5 seconds		0.1 seconds
Press keypad button (0-9) (Critical low battery)	-	-	5 seconds	0.1 seconds	0.1 seconds
Correct pin code	-	1 second			0.4 seconds
Incorrect pin code	(.01 seconds) x 3	-			(.01 seconds) x 3
Device is not calibrated	-	-		0.1 seconds	.01 seconds	After operation , Orange LED will blink
Incorrect pin code entered 4 times consecutively/Device Hack	(0.5 seconds) x 20	-			(0.5 seconds) x 20	Red LED + Beep (0.5 seconds) x 20 followed by; Red LED and Buzzer (0.5 seconds) every 2 seconds (total time 60 Seconds)
Lock and unlock complete	-	1 second			0.4 seconds
Latch jam (Lock/Unlock/Calibration Incomplete)	(0.2 seconds) x 3	-			(0.2 seconds) x 3	Blinks 3 times (ON time 0.2 seconds and OFF time 0.2 seconds)
Enter programming mode	-	(0.2 seconds) x 2	5 seconds	10 seconds	(0.2 seconds) x 2	When in programming mode: Solid Red, upon Leave programming mode: Red LED off + Beep (0.4 seconds)
In programming mode (Correct operation: )	-	1 second			0.4 seconds	Red + Beep (0.5 seconds)*20 followed by; Red LED and Buzzer(0.5 seconds) every 2 seconds (total hack time 60 Seconds)
In programming mode (Error:)	(0.1 seconds) x 3	-			(0.1 seconds) x 3	All LEDs will light up one by one and the buzzer will play with each LED
Low battery alert (After each operation under low power mode)	-	-		(0.1 seconds) x 5	(0.1 seconds) x 5
Low battery alert (When standby mode)	-	-
Critical low battery(When press lock)	3 seconds	-			(1 seconds) x 3
Critical low battery(When unlocked)	3 seconds	-			(1 seconds) x 3
Critical low battery(When standby)	(0.1 seconds) every 5 seconds	-
Vibration event detection	(0.5 seconds) x 20	-			(0.5 seconds) x 20
Power ON	0.5 seconds	0.5 seconds	0.5 seconds	0.5 seconds	(0.5 seconds) x 4
BLE Connection	-	-	(0.1 seconds) every 5 seconds			Total indication time is 20 seconds
Reset to factory settings	-	1 second			3 seconds	Buzzer Steady 3 seconds, then Green Steady 1 second
Button press wake up	-	5 seconds				For touch wake-up time
Already Lock/Unlock	(0.2 seconds) x 3	-			(0.2 seconds) x 3	Blinks 3 times (ON time 0.2 sec and OFF time 0.8 seconds)
User code already added/ Duplication	0.6 seconds	0.6 seconds	0.6 seconds		(0.2 seconds) x 3
General error	(0.2 seconds) x 2	-			(0.2 seconds) x 2

Articles in this section

Comments